ERG160 Assembly Pack Checklist
ERG160 Step-by-Step Assembly Instructions
1. Seat Assembly
a. Slide the Seat Assembly (38) onto the Slide Rail (2). Attach the Limiter Pad (#34) to the Slide Rail (2) and secure with two Flat Head Screws (#62).
2. Rear Stabilizer
a. Attach the Rear Stabilizer (4) to the Slide Rail (2), tighten with four Flat Washers (#55) and four Spring Washers (#52) and four Allen Bolts (#81).
3. Front Stabilizer
a. Attach the Front Stabilizer (3) to the Main Frame (1), secure with two Flat Washers (#55) and two Spring Washers (#52) and two Allen Bolts (#45).
4. Slide Rail
a. Insert the Slide Rail (2) into the Main Frame (1), secure with two Flat Washers (#44) and two Allen Bolts (#46) and four Allen Bolts (#92).
b. Attach the Stop Brackets (11, 15) to the Sliding Rail (2) and secure them with two Self-tapping Screws (#59).
5. Pedals
a. Attach the Left Pedal (12L) onto the Main Frame (1) and secure with two Hex Head Bolts (#50) and one Pedal Bushing (#64).
b. Repeat the same procedures to assemble the Right Pedal (12R) to the Main Frame (1).
6. Connecting the Console
a. Connect the Sensor Wires (40) with the Console (91) and secure with four Crosshead Screws (65) that are pre-assembled on the back of Console (91).