Your treadmill settings allow you to calibrate your treadmill in the event that the speed and incline settings need to be adjusted. To calibrate your TRX5500 treadmill:
- Power on the treadmill (if not already on), and wait until the display shows the main page.
- Touch the gear icon to enter the Settings page.
- Touch software button to enter the Software page.
- Tap the software version five (5) times to enter the Password page. Enter password “20160620."
- Touch “CONFIRM” to enter the Device Info page.
- Touch the "CONTROLLER" button to enter the Controller Speed Calibration page. Two kinds of Calibration Procedures can be processed. Do not check “Start calibrating speed?” instead, touch the "CHECK SPEED" button.
- This procedure will only calibrate the incline motor and the running belt won’t move. The incline parameter will change and record but the speed parameter will not.
- Touch the "REBOOT" button to reboot the console after the calibration procedures have finished.
- Touch “Start calibrating speed?” and then touch the "CHECK SPEED" button.
- This procedure will calibrate both incline and speed. Incline and speed parameters will change and record.
- Touch the "REBOOT" button to reboot the console when the calibration procedures have finished.