Your TRX1000 comes equipped with two (2) front transport wheels.
To fold your treadmill:
- Locate the release pin on the left upright of your treadmill near the middle of the frame.
- Pull the release pin outwards and lift the treadmill deck until it is secured by the locking mechanism on the left upright tube (you will hear it pop into place when secure).
To transport your treadmill:
CAUTION: Do not attempt to move the unit unless it is in the folded and locked position. Remove the power cord from the front of the unit to avoid possible damage. Use both handrails to maneuver the unit to the desired position.
This treadmill is equipped with two (2) front transport wheels that are engaged when the treadmill is folded. Lean the treadmill back slightly so that the transport wheels touch the floor. After folding, simply roll the treadmill away.
To unfold your treadmill:
WARNING: Before unfolding the treadmill, hold the deck with one hand to prevent it from falling and release the knob with your other hand.
- Apply slight forward pressure on the treadmill running deck with your right hand.
- Pull on the release pin in an outwards motion and slowly lower the running deck to the floor.
