TRX1000 Assembly Pack Checklist
TR150 Step-by-Step Assembly Instructions
1. Remove Deck From Box
| No Hardware Needed for This Step |
a. Remove the unit from the box and place it on a flat and level floor for the duration of assembly.
2. Computer Cables
| No Hardware Needed for This Step |
a. Connect the computer cable (38 - middle) with the computer cable (39 - lower).
3. Right and Left Uprights
| Hardware Needed for This Step | |
| #87 | Bolts (6 pcs) |
| #79 | Flat Washers (6 pcs) |
a. Insert the uprights (3 - left, 4 - right) into the frame base (2) with the six button head socket bolts (#87), four flat washers (#79), and two curved washers (#88) using the screw driver.
4. Console Attachment
| No Hardware Needed for This Step |
a. Connect the computer cable (37 - upper) with the computer cable (38 - middle).
5. Console Supports
| Hardware Needed for This Step | |
| #87 | Bolts (4 pcs) |
| #88 | Curved Washers (4 pcs) |
a. Install the console support (5) into the uprights (3 - left, 4 - right) with the six button head socket bolts (#87), two flat washers (#79), and four curved washers (#88) using the screw driver.
Note: Please tighten all screws after assembly is complete. Be sure to check the belt lubrication before initial use. Need assistance? See our article: "How to Lubricate Your Treadmill."